(i) Probability the bulb is defective
P(defective)=total bulbsdefective bulbs=505=101
(ii) Probability the bulb is not defective
Use the complement — it is faster and less error-prone than recounting:
P(not defective)=1−P(defective)=1−101=109
(Checking directly: 50−5=45 good bulbs, and 5045=109.)
(iii) After the batch is changed
Both the numerator and the denominator move here, so track each separately.
Total bulbs: start with 50, remove 5, add 10:
50−5+10=55
Defective bulbs: all 5 old ones were removed, and 2 of the new ones are defective:
0+2=2
P(defective)=552
Note how much the quality improved: from 101=0.1 down to 552≈0.036.
(iv) Working backwards to a count
This part runs in reverse: the probability is given and the count is wanted.
P(defective)=80number defective=403
number defective=403×80=3×2=6 bulbs
(v) Is the original batch acceptable?
Compare the batch's probability with the factory's limit:
P(defective)=101against the limit201
To compare two fractions, put them over a common denominator:
101=202and202>201
No — the batch is not acceptable.
The defect rate is twice the permitted maximum. To meet the standard the batch could contain at most 201×50=2.5, that is 2 defective bulbs, not 5.