(a) Iron rusts only when air (oxygen) and water are both in contact with it. All four methods put a covering over the metal, so that air and moisture cannot reach the iron surface.
(b) The links of a chain move against each other all the time. Paint would crack and flake off as soon as the chain moved, leaving bare iron. Oil spreads into the moving joints, keeps air and water out, and also lubricates the chain, and it can easily be applied again when it wears away.
(c) Galvanising coats the iron with a thin layer of zinc. A bucket is filled with water and knocked about constantly: paint would chip off, and oil would wash away into the water and spoil it. The zinc coat is hard, lasting and not washed off by water. The book also notes that a galvanised article stays protected against rusting even if the zinc coating is broken.
(d) The tank stands outdoors in sun and rain for years. Oil would be washed off by rain, would collect dust and would need re-applying very often. Paint dries to a hard film that stays in place for years and keeps air and rain away from the steel (as long as it is not scratched).
(e) A hinge is a moving part. Paint would crack as the hinge turned, and would also stick the parts together. Grease is thick, so it stays in the joint, keeps out air and moisture, and lubricates the hinge at the same time.

What rusting needs: air and water together; take away either and the iron does not rust.