(a) Brass is an alloy, and an alloy is a homogeneous mixture of two or more metals (or a metal and a non-metal), not a compound. It is prepared by first melting the primary metal (copper) and then dissolving the other element (zinc) in it in a definite proportion, and cooling the melt. No electrons are transferred and no new compound is formed; the zinc is simply mixed evenly through the copper. A change in properties does not prove a compound has formed: mixing any metal with another substance changes its properties, which is exactly why alloys are made.
(b) The electrical conductivity of an alloy is less than that of the pure metals. Brass does not conduct electricity as well as pure copper, so with a long brass wire in the circuit a smaller current flows through the bulb, and it glows more dimly. (A long, thin wire is used so that the wire, and not just the bulb, has a noticeable effect on the current.)
The rule for melting point is similar: the melting point of an alloy is less than that of the pure metals. (This is why solder, an alloy of lead and tin, is used for joining electrical wires.)
(c) Connecting wires should waste as little electrical energy as possible. Pure copper is one of the best conductors of electricity, so it carries the current with very little loss, and it is also ductile, so it can be drawn into thin wires. Brass and bronze are not good conductors of electricity, which is why copper, not an alloy of copper, is used for making electrical circuits.

Brass, bronze and solder: what alloying changes.