(a) The correct sequence (Fig. 3.10) is:
ore → enrichment (removal of gangue) → roasting (sulphide to oxide) → reduction of the oxide with carbon → refining → pure metal
The missing first step is enrichment of the ore. Ores mined from the earth contain large amounts of impurities such as soil and sand, called gangue, which must be removed before the metal is extracted.
(b) Without enrichment: the mined ore still contains large amounts of gangue (soil, sand and rock). All of it would have to be heated in the roasting furnace and carried through the reduction step, wasting a great deal of fuel and carbon on material that contains no metal. The gangue would also remain mixed with the metal produced, so the impure metal would carry far more impurity into the refining step. Removing the gangue first means that only the useful mineral is processed.
Refining last: the metal produced by reduction is not very pure. Refining removes these impurities, so it can only be done once there is metal to purify. In electrolytic refining the impure metal itself is made the anode, so the metal must already have been produced. Refining in the middle of the process, before the metal exists, is impossible.


Electrolytic refining: the impure metal dissolves at the anode and rebuilds itself, pure, at the cathode.