Bathroom taps made of steel are usually chrome-plated rather than painted, even though both methods are used to stop iron and steel from rusting.
Which is the best reason for choosing chrome plating here?
Confirming your payment
Competency-Based Questions (CBQ) · Question 21 of 80
Bathroom taps made of steel are usually chrome-plated rather than painted, even though both methods are used to stop iron and steel from rusting.
Which is the best reason for choosing chrome plating here?
(A) The hard, shiny chromium layer keeps air and water away from the steel and survives handling and running water, whereas paint would soon wear off.
(B) Chromium corrodes in place of the steel, so the tap stays protected even after all of the chromium has been used up.
(C) Chrome plating mixes chromium all through the steel, so the whole tap becomes an alloy like stainless steel.
(D) Chromium conducts heat away from the tap so quickly that water drops on it dry up before they can cause rusting.
Option (A) is correct.
Explanation: Iron and steel rust only when both air and water reach the metal. Painting, oiling, greasing, galvanising and chrome plating all work by covering the metal so that air and water cannot reach it. Which covering is chosen depends on how the object is used. A bathroom tap is wet almost all the time and is gripped and turned every day. Paint is soft: it would be scratched and worn away, and rusting would start wherever the steel was exposed. A plated layer of chromium is hard, stays shiny and is not attacked by water, so it remains intact and keeps protecting the steel for years, and it also looks attractive.
Option (B) is wrong: chrome plating protects only as a covering. The chromium is meant to stay in place; if the layer were used up, the steel beneath would be exposed and would rust.
Option (C) is wrong: plating puts a thin coat on the surface only. An alloy is made by melting the main metal and dissolving the other elements in it, so that they are mixed all the way through; stainless steel is made this way, not by plating.
Option (D) is wrong: rusting does not depend on the tap conducting heat. A tap is wet for long periods, and only a continuous covering that keeps out air and water can stop it from rusting.

Rusting needs both air and water; a covering that keeps either out prevents it.